4 Popular Types of Mechanical Bearings

Mechanical bearings are used in many components to provide improved linear or rotational movement. They are also effective at minimizing friction between two parts, and this means less energy is used. Bearings are made of plastic or metal and found in everyday items like computers, refrigerators and cars.

There are several types of mechanical bearings with each type intended to work in a specific application and to accept a different load (thrust or radial). Provided the right type of bearing is used to match the load, they have the potential to last a very long time.

Here are four of the most popular types:

Plain

The plain bearings are the most basic type of bearing. They are built without a rolling element and simply rely on the bearing surface to provide smoother movement. The simple design means this type has the long life potential, least expensive, and can easily accept higher load applications.

Rolling element

The roller element bearings can include the roller bearing and ball bearings. This type of bearing relies on two races or rings to improve the motion and minimize sliding or resistance. The ball bearings are the most common type and built to accept both thrust and radial loads. However, they are most popular in applications when the load is quite small. The roller bearing is the preferred choice for the heavier loads because they use cylinders that have a much greater contact area.

Fluid

The fluid bearings rely on a thin liquid or gas layer to help with supporting their load. They are split into two categories: hydrostatic bearings and fluid-dynamic bearings. The hydrostatic type uses air, water or oil to promote the smooth operation, and must work with an external pump. The fluid-dynamic type makes use of rotation to create a lubricating wedge. They are most practical for high precision, high-speed or high load applications that go beyond the capabilities of the standard ball bearings.

Magnetic

The magnetic bearings have the ability to support a rotating part using a magnetic field with no actual physical contact. This type of setup needs a constant power source to keep the load stable. In the event of a control system or power failure, a back-up bearing system is necessary. They are built to operate with a very predictable and low friction and do not require any sort of lubricant to maintain the smooth performance. This is a popular type of bearing for industrial machinery such as generators, motors and turbines.

TS TRT Notfication 2017 will be released on 21st October 2017, Job-seekers who are looking for government teacher jobs can ready for apply TS TRT 2017 Online Application . TS TRT Notification 2017 Telangana Teacher recruitment for the 8972 vacancies in 31 newly created districts. So Who are eligible for SGT, SA, PT and PTE vacancies they have to submit the application at TSPSC official website.

5 Tips to Choose Office Furniture

When your business is growing, you need a good office as well. And this is not the only thing that should be considered. You also need to opt for the best furniture for your office, especially office tables. Given below are 5 tips to help you choose the best office furniture. Read on.

1. Layout vs. size

The office desk you choose should fit well, look great and should have enough room for drawers and cabinets. Your employees should be able to walk around your room comfortably. So, make sure you consider these things when buying office furniture.

2. Practicality vs aesthetic

While aesthetics are important, you may want to give more importance to practicality of the furniture. So, you may want to discuss the practicality first and then think about the beauty of the furniture. As a matter of fact, functional furniture stands the test of time.

So, make sure the desk has enough room for your files, legs and other stuff. Moreover, the furniture should be able to accommodate several functionalities. You may want to put money in a standing or regular desk based on your needs.

3. Value for money

It’s easy to go for the most inexpensive furniture, but you should not go this route. What you need to do is do your research and consider the quality as well as the finishing of the furniture. In other words, you may want to go for durable and affordable furniture only. Make sure you get value for your money, which is possible only if you prefer quality.

4. Focus on ergonomics

The furniture you choose may look great but may not have good ergonomics. For instance, some desks may be too low or too high. In the same way, some chairs may give you a backache. Often, back pain is a result of wrong sitting posture and sometimes, it’s because of the poor ergonomics chair.

5. Choose comfort

Your workspace or office should be comfortable. Not focusing on comfort is a big mistake. You may not want to forget that you are going to sit in the chair for hours on a daily basis. Therefore, we suggest that you go for a chair that is comfortable enough.

We don’t say that you should not consider the look of the chair. Of course, the looks also matter, but what matters the most is the comfort of the chair.

Takeaway

It’s not as easy to buy office furniture as you may think. If you make the wrong decision, you will end up spending your budget on the furniture that is not needed in your office. So, we suggest that you take your time prior to making this decision. As an alternative, we suggest that you hire the services of a good furniture consultant. You can also consult a good interior designer as well.

Getting the Most Out of Your Office Space

We spend most of our waking hours at work in the office. The environment that we surround ourselves with therefore plays a huge role in how productive we are and how creative we can be in our daily tasks. This is why we need to make the most of our office space to ensure only the best quality work is produced.

Here are 5 simple ways to make the most of your office space:

1. Natural Light
There is nothing worse than artificial light to dampen your productivity in the office. Numerous studies have looked at the effects of natural sunlight on office workers, and natural lighting came out on top. Not only does natural light help you to be more productive in your day-to-day tasks, it also has a significant influence on your health. If natural sunlight is not an option in your current office space, then opt for smart lighting solutions that provide light that mimics natural light and tricks your body into thinking you are outside in natural sunlight.

2. Improve the Air Quality
Many people don’t realize that the quality of the air surrounding them can affect their overall productivity and creativity.

Simply adding some plants to your office space can make the world of difference to the air quality. Plants remove excess carbon dioxide from the air and provide a fresh burst of oxygen to the air. Plants also act as a filter, removing harmful toxins from the air. Plants have also proven to improve overall health for office staff and improve both creativity and productivity.

3. Minimalism
Sometimes you need to be minimal in order to achieve. Remove unnecessary things from around the office and your work space to minimize distractions. Keep the bare minimum on your desk to ensure you don’t get distracted by anything too easily. Fewer distractions lead to an increase in productivity and better work at the end of the day.

4. Interior Design
The environment in which you work should inspire you and not put a damper on your creativity. It’s important that the design of your office space reflects what your business does and the message and culture you want to convey. Design goes far beyond simply painting the walls and hanging an artwork or two. It’s about the furniture placement, how people move within the space and how comfortable they feel in their personal work space.

Populate the office space with items that inspire staff to want to work and produce good work. The misconception that only creative agencies should have creative work spaces is rife. Just because you work with numbers all day doesn’t mean you can’t have a creatively decorated office.

5. Create a Break Space and Use it!
The biggest killer of productivity is not taking enough breaks away from your screen or eating lunch at your desk. Create a space away from your work space where you can go for a quick 5-minute breather and during your lunch break. This will ensure you don’t take your work with you and you give your brain a break to refresh and re-boost. This has a positive impact on your productivity and forces you to move around and stretch your muscles.

5 Energy-Saving Tips For Manufacturers

Are you worried about the current oil prices? If so, you should stop worrying as the price won’t last forever. Actually, OPEC has almost no influence on electricity or natural gas. The fact of the matter is that the old coal-based power plants increased electricity prices in 2016. However, the problem is that energy efficiency is really important for you should you want to stay ahead of the competition. If you are a plant manager and you want to save energy, we suggest that you follow the tips given below.

Process Heating

The US Department of Energy suggests that plant managers can cut down on the heating costs through the implementation of some energy-saving measures. As a matter of fact, process heating includes 30% of the energy consumed in this sector. Therefore, if you save energy in this area, you can make a significant impact.

Moreover, you can monitor and control your air-to-fuel ratio and exhaust gases in order to save a lot of energy. But if your plant requires lots of hot water, it’s a good idea to use a solar-water heating plant to preheat the process water. This is another great way of saving a lot of money.

Motors and Equipment

Machine drives accounts for over 22% of power consumption in the manufacturing sector. If you want to cut down on your operating costs, we suggest that you analyze the system and shaft losses. In addition, you can also consider upgrading to a system that is more efficient.

At times, you may have to replace the equipment to achieve your targets. But you don’t have to spend a huge sum for each upgrade. As a matter of fact, you can hone the mechanical performance of the plant through the alteration of the operational or maintenance procedures.

Lighting

Typically, building-performance experts consider lighting as the main source of energy consumption. For energy saving, you can opt for fluorescent bulbs, fixtures, LED tube lights, and skylights, just to name a few. However, you don’t have to replace all of your lighting systems in order to save energy.

Utilities

You may not want to overlook utilities as far as saving energy is concerned. What you need to do is review your usage plans and then get in touch with the service provider to find out if they can provide alternative procurement or other option that can help you save money.

Actually, some utilities offer attractive incentives for the installation of energy-saving improvements. It’s also a good idea to contact the competitors. You can also negotiate with them to get the best deal.

Employees

For energy efficiency, employee behavior also matters. You may want to let your employees know your goals and progress. Don’t forget to appreciate them for playing a role in the achievement of your goals. You will see that they have great insights. As a matter of fact, studies show that upgrades for energy efficiency help workers become more productive.

Long story short, when you are planning an energy-saving program, you may want to look for opportunities that can help you reduce cost. Next, as the operating costs come down, you can invest in an energy saving infrastructure like a solar energy system. Hopefully, the tips given above will help you save on energy costs.